• 20/A, E.V Lane, S.P Road Cross, Bangalore - 560078, Karnataka, India

Weld Neck Flange (WNRF)

A weld neck flanges consists of a circular fitting with a protruding rim around the circumference. Generally machined from a forging, these flanges are typically butt welded to a pipe. The rim has a series of drilled holes that permit the flange to be affixed to another flange with bolts.

Category:
BRAND: ATC,

Product description

Specifications:

Type : WN Forged Flange
Size : ½” (15 NB) to 48″ (1200NB)
Standard : ANSI B16.5, ANSI B16.47, ANSI B16.36, ANSI B16.48, BS 4504, EN1092, UNI 2277/2278, DIN, JIS, SABS1123, GOST-12820
Class : 150 LBS, 300 LBS, 600 LBS, 900 LBS, 1500 LBS, 2500 LBS, DIN Standard ND-6,10, 16, 25, 40 Etc.
DIN : DIN2527, DIN2566, DIN2573, DIN2576, DIN2641, DIN2642, DIN2655, DIN2656, DIN2627, DIN2628, DIN2629, DIN 2631, DIN2632, DIN2633, DIN2634, DIN2635, DIN2636,DIN2637, DIN2638, DIN2673
BS : BS4504 , BS4504, BS1560, BS10
In Form : SORF, WNRF, BLRF, SWRF, LAP Joint, Threaded, Reducing, Spectacle, etc
Specialize : As per drawing
Coating/Surface Treatment : Anti-rust Paint, Oil Black Paint, Yellow Transparent, Zinc Plated, Cold and Hot Dip Galvanized
Connection Type : Ring Type Joint, Lap-Joint Face, Raised Face, Flat Face, Large Male-Female, Small Male-Female, Large
Tongue & Groove, Small Tongue & Groove
Flange Face Type : Flat Face (FF), Raise Face (RF), Ring Joint (RJT)
Dimensions : ANSI B16.5, ANSI B16.47 Series A & B, MSS SP44, ASA, API-605, AWWA, Custom Drawings
Packing : No Fumigate or Fumigate Plywood/Wood Pallet or Case
Usage : Oil Field, Offshore, Water System, Shipbuilding, Natural Gas, Electric Power, Pipe Projects etc.

 

 

 

 

 

 

 

 

 

 

Dimensions:

ANSI, ASME, ASA, B16.5 150lb/sq.in. WELDING NECK FLANGE RF
ø D b g m a J* h k Holes l Kg.
1/2″ 88,9 11,1 34,9 30,2 21,3 15,7 47,6 60,3 4 15,9 0,500
3/4″ 98,4 12,7 42,9 38,1 26,7 20,8 52,4 69,8 4 15,9 0,700
1″ 107,9 14,3 50,8 49,2 33,5 26,7 55,6 79,4 4 15,9 1,100
1 1/4″ 117,5 15,9 63,5 58,8 42,2 35,1 57,1 88,9 4 15,9 1,500
1 1/2″ 127,0 17,5 73,0 65,1 48,3 40,9 61,9 98,4 4 15,9 1,800
2″ 152,4 19,0 92,1 77,8 60,3 52,6 63,5 120,6 4 19,0 2,700
2 1/2″ 177,8 22,2 104,8 90,5 73,1 62,7 69,8 139,7 4 19,0 4,400
3″ 190,5 23,8 127,0 107,9 88,9 78,0 69,8 152,4 4 19,0 5,200
3 1/2″ 215,9 23,8 139,7 122,2 101,6 90,2 71,4 177,8 8 19,0 6,400
4″ 228,6 23,8 157,2 134,9 114,3 102,4 76,2 190,5 8 19,0 7,500
5″ 254,0 23,8 185,7 163,5 141,2 128,3 88,9 215,9 8 22,2 9,200
6″ 279,4 25,4 215,9 192,1 168,4 154,2 88,9 241,3 8 22,2 11,000
8″ 342,9 28,6 269,9 246,1 219,1 202,7 101,6 298,4 8 22,2 18,300
10″ 406,4 30,2 323,8 304,8 273,0 254,5 101,6 361,9 12 25,4 25,000
12″ 482,6 31,7 381,0 365,1 323,8 304,8 114,3 431,8 12 25,4 39,000
14″ 533,4 34,9 412,7 400,0 355,6 336,5 127,0 476,2 12 28,6 51,000
16″ 596,9 36,5 469,9 457,2 406,4 387,3 127,0 539,7 16 28,6 60,000
18″ 635,0 39,7 533,4 504,8 457,2 438,1 139,7 577,8 16 31,7 71,000
20″ 698,5 42,9 584,2 558,8 508,0 488,9 144,5 635,0 20 31,7 88,000
22″ 749,3 46,0 641,2 609,6 558,8 539,7 149,2 692,1 20 34,9 102,000
24″ 812,8 47,6 692,1 663,6 609,6 590,5 152,4 749,3 20 34,9 119,000
* The data “J” corresponds to the STD schedule

IMP. NOTES:
1. Class 150 flanges except Lap Joint will be furnished with 0.06 (1.6mm) raised face, which is included in ‘Thickness’ (C) and ‘Length through Hub’ (Y1), (Y3).
2. Blind Flanges may be made with the same hub as that used for Slip-on Flanges or without hub.
3. For Slip-on, Threaded, Socket Welding and Lap Joint Flanges, the hubs can be shaped either vertical from base to top or tapered within the limits of 7 degrees.
4. Depth of Socket (D) is covered by ANSI B 16.5 only in sizes through 3 inch, over 3 inch is at the manufacturer’s option.
5. The gasket surface and backside (bearing surface for bolting) are made parallel within 1 degree. To accomplish parallelism, spot facing is carried out according to MSS SP-9, without reducing thickness (C).
6. Welding Neck Flange Bore Size SCH10, SCH20, SCH30, STD, SCH40, SCH60, SCH80, SCH100, SCH 120, SCH140, SCH160, XS

error: Content is protected!